Assembling the pole:
1.) Push the tube onto the handle housing as far as the mark and screw it tight with the assembly nut.
2.) Hook the carabiner of the shoulder strap into the strap attachment.
3.) The additional handle consists of the hexagon screw and lock. It is fitted to the handle attachment as illustrated.
4.) Push the hexagon screw into the additional handle and screw it tight to the lock.
Assembling the Cutter Rail and Saw Chain
1.) Undo the fastening screw of the chain wheel cover.
2.) Take off the chain wheel cover.
3.) Lay the chain as shown in the groove which runs around the cutter rail.
4.) Insert the cutter rail and chain as shown in the mounting in the chainsaw. At the same time guide the chain around the sprocket wheel.
5.) Attach the chain wheel cover and fasten it hand-tight with the fastening screw.
Important: Do not fully tighten the fastening screw until after you have adjusted the chain tension.